How to measure
- Measure length and width wall to wall at floor level, at the longest and widest points. Round up to the next inch.
- Measure ceiling height from the floor to the ceiling, not to the top of the trim.
- L-shaped room: split it into a main rectangle and an extension. For the extension, 'length' is the side that opens into the main area.
- Several separate rooms? Add each one — they're totalled and listed individually.
How the room area calculation works
Floor area = length × width Perimeter = 2 × (length + width) Wall area = perimeter × ceiling height Volume = floor area × ceiling height L-shape: perimeter = P(main) + P(extension) − 2 × opening
A rectangular room's floor and ceiling are the same rectangle, and its walls unfold into one long strip as tall as the ceiling and as long as the perimeter.
In an L-shaped room the two rectangles share an open edge. That edge is floor, not wall, so it's subtracted twice from the combined perimeter — once for each rectangle.
Wall area is gross: doors and windows aren't deducted. The paint and drywall calculators take them out for you.
Worked example
A 14 × 12 ft bedroom with an 8 ft ceiling.
- Floor area: 14 × 12 = 168 sq ft (168 ÷ 9 = 18.7 sq yd)
- Perimeter: 2 × (14 + 12) = 52 ft
- Wall area: 52 × 8 = 416 sq ft
- Volume: 168 × 8 = 1,344 cu ft
168 sq ft of floor, 52 ft of baseboard, 416 sq ft of wall before openings, and 1,344 cu ft of air.
Reading your result
Floor area is what flooring, carpet and underlayment are sold against. Add a waste allowance before buying — the flooring calculator does this.
Perimeter is your baseboard, quarter-round or carpet-edge length. Subtract doorway widths if the trim stops there.
Wall area is the starting point for paint, wallpaper and drywall. Volume matters for heating, cooling and air purifiers.
Assumptions
- Walls are straight and meet at right angles. Measure the longest point of a bay or alcove, or treat it as its own small rectangle.
- Ceilings are flat. For vaulted or sloped ceilings, use the average height for volume and measure gable walls separately.
- In an L-shaped room, the extension opens into the main area along its full length.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- For real estate listings or appraisals, square footage follows local standards (often ANSI Z765 in the US) and is measured by a licensed appraiser.
Frequently asked questions
How do I find the square footage of a room?
Multiply length by width in feet. A 14 × 12 ft room is 168 sq ft. For an L-shaped room, split it into two rectangles and add them.
How do I calculate an L-shaped room?
Treat it as two rectangles. A 20 × 12 ft main area plus a 10 × 8 ft extension is 240 + 80 = 320 sq ft. Its perimeter is 64 + 36 − 2 × 10 = 80 ft, because the 10 ft opening isn't wall.
How do I work out the wall area of a room?
Multiply the perimeter by the ceiling height. A 14 × 12 ft room with 8 ft ceilings has 52 × 8 = 416 sq ft of wall before you take off doors and windows.
How many square yards is my room?
Divide square feet by 9. A 168 sq ft room is 18.7 sq yd — useful because carpet is often priced per square yard.