Skip to content
MeasureToBuy

Project planner

Finish a room

Take a room from new drywall to paint and trim: sheets, mud and tape, a primer coat, finish paint, baseboard lengths and caulk — with one shopping list.

  1. 01 Room
  2. 02 Drywall
  3. 03 Primer and paint
  4. 04 Baseboard and caulk
  5. 05 Cost
  6. 06 Summary
  1. Step 1: Room

    Room size, doors and windows. Openings come off the wall area.

    Floor to ceiling.

    A standard 3 × 7 ft door is 21 sq ft.

    A typical 3 × 5 ft window is 15 sq ft.

    Wall area
    416 sq ft
    Doors & windows
    -51 sq ft
    Wall board
    365 sq ft
    Ceiling board
    168 sq ft
  2. Step 2: Drywall

    Sheets for walls and ceiling, plus compound, tape and screws.

    Sheet size

    32 sq ft · easiest to carry

    Waste allowance

    Offcuts at openings, corners and the top course. 10% for simple rooms, 15% for many openings or angles.

    Buy4 × 8 ft sheets
    19 sheets
    Joint compound≈ 0.137 lb per sq ft of board
    73 lb
    All-purpose compound, 4.5-gal bucketsone per ~450 sq ft
    2 buckets
    Paper tape≈ 370 ft per 1,000 sq ft
    197 ft
    Tape rolls (500 ft)
    1 roll
    Drywall screws≈ 1 per sq ft
    533 screws
  3. Step 3: Primer and paint

    New board and compound need a full primer coat before paint.

    Primer

    New drywall needs it

    Coats

    Recommended

    sq ft/gal

    Printed on the can. Most wall paints list 250–400 sq ft per gallon (about 6–10 m² per litre).

    Primer3 × 1-gal can · one coat at 250 sq ft/gal
    3 gal
    Coats of paint
    2 coats
    Paint, walls and ceiling4 × 1-gal can
    4 gal
  4. Step 4: Baseboard and caulk

    Baseboard around the room, less doors, and caulk along its top edge.

    Baseboard stops at each door casing.

    Lengths you'll buy

    Longer lengths mean fewer joints on long walls. Check what your store stocks.

    Baseboard waste

    Rule of thumb for corner cuts and offcuts.

    Baseboardperimeter less doors
    49 ft
    Waste
    10%
    16 ft baseboard lengths
    4 pieces
    Caulk, 10.1 oz tubes⅛ in bead along the top edge
    1 tube
  5. Step 5: Cost

    Your store's prices.

    per sheet
    per bucket
    per gal
    per gal
    per ft
    per tube
    Drywall
    $304.00
    Joint compound
    $40.00
    Tape, screws and bead
    $30.00
    Primer
    $84.00
    Paint
    $168.00
    Baseboard
    $96.00
    Caulk
    $6.00
    Estimated material cost
    $728.00

MeasureToBuy · project summary

Room finishing project

Buy 19 sheets of drywall, 4 gal of paint and 4 lengths of baseboard.

Measurements

  • Room length: 14 ft
  • Room width: 12 ft
  • Wall height: 8 ft
  • Include the ceiling: Yes
  • Sheet size: 4 × 8 ft
  • Doors: 1
  • Windows: 2
  • Area per door: 21 sq ft
  • Area per window: 15 sq ft
  • Coats: 2 coats
  • Door opening width: 36 in
  • Lengths you'll buy: 16 ft
  • Primer: Full coat

Key figures

Wall area
416 sq ft
Doors & windows
-51 sq ft
Wall board
365 sq ft
Ceiling board
168 sq ft

Shopping list

Buy4 × 8 ft sheets
19 sheets
All-purpose compound, 4.5-gal bucketsone per ~450 sq ft
2 buckets
Primer3 × 1-gal can · one coat at 250 sq ft/gal
3 gal
Paint, walls and ceiling4 × 1-gal can
4 gal
16 ft baseboard lengths
4 pieces
Caulk, 10.1 oz tubes⅛ in bead along the top edge
1 tube

Material cost

Drywall
$304.00
Joint compound
$40.00
Tape, screws and bead
$30.00
Primer
$84.00
Paint
$168.00
Baseboard
$96.00
Caulk
$6.00
Estimated material cost
$728.00

Walls and ceiling are counted separately so leftover pieces aren't assumed to fit across both — ceilings are usually hung with the longest sheets you can lift. Finishing quantities are rules of thumb for a standard level-4 finish. Heavy skim coats use more compound.

Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.

Before you start

  • Measure the room and count doors and windows.
  • Decide whether the ceiling is part of the job.
  • New drywall and compound need a full coat of primer before paint.

Questions about this project

In what order do I finish a room?

Hang and finish drywall, prime, paint the ceiling then the walls, then install and caulk the baseboard and touch up the paint.

Do I paint baseboards before installing them?

Priming and first-coating trim before installing saves time; fill nail holes, caulk and apply the last coat once it's up.

Calculators used in this project

Need just one number? Each step is also a stand-alone calculator.