Project planner
Build a deck
Size a rectangular deck and get the whole material list: deck boards and fasteners, joists, rims, posts and footing concrete — priced with your lumber yard's numbers.
- 01 Deck size
- 02 Decking
- 03 Framing
- 04 Footings
- 05 Cost
- 06 Summary
Step 1: Deck size
Length along the house and width out from it.
Deck boards run this way, parallel to the house.
Joists run this way.
- Deck area16 ft × 12 ft
- 192 sq ft
Step 2: Decking
Board width, gap and the stock length you'll buy.
5½ in for 5/4×6 and 2×6 boards, 3½ in for ×4 boards. Composite is usually 5½ in.
3/16 in (5 mm) is common; follow the manufacturer for composite.
A 5 lb box of 2½ in deck screws holds about 350–400.
- Rows of boards
- 26 rows
- Deck boards16 ft long, incl. waste
- 29 boards
- Deck screws676 screws
- 2 boxes
Step 3: Framing
Joists under the boards, a beam on posts at the outer edge.
6–8 ft is typical. Your beam size and local code set the maximum.
- Joists12 ft stock, 16 in o.c.
- 13 joists
- Ledger + rim joistalong the house and the outer edge
- 32 ft
- Beamsouter edge only
- 1 beam
- Posts4 per beam
- 4 posts
Step 4: Footings
One concrete footing under each post.
Below your local frost line.
- Footings
- 4 footings
- Concrete2.4 cu ft each
- 0.35 cu yd
- Premix bags (incl. 10%)
- 18 bags
Step 5: Cost
Prices from your lumber yard.
per boardper joistper postper bagper box- Deck boards
- $812.00
- Fasteners
- $90.00
- Joists and rims
- $512.00
- Posts
- $100.00
- Footing concrete
- $117.00
- Hangers and hardware
- $150.00
- Estimated material cost
- $1,781
MeasureToBuy · project summary
Deck material estimate
Buy 29 deck boards plus 13 joists and 4 posts.
Measurements
- Deck length (along the house): 16 ft
- Deck width (out from the house): 12 ft
- Board face width: 5.5 in
- Gap between boards: 0.188 in
- Board length you'll buy: 16 ft
- Joist spacing: 16 in o.c.
- Fasteners: Deck screws
- Screws per box: 350
- Attached to the house with a ledger: Yes
- Post spacing along each beam: 6 ft
- Footing diameter: 12 in
- Footing depth: 3 ft
- Bag size: 80 lb
- Joist hangers & hardware: Include an allowance
Key figures
- Deck area16 ft × 12 ft
- 192 sq ft
Shopping list
- Deck boards16 ft long, incl. waste
- 29 boards
- Deck screws676 screws
- 2 boxes
- Joists12 ft stock, 16 in o.c.
- 13 joists
- Ledger + rim joistalong the house and the outer edge
- 32 ft
- Posts4 per beam
- 4 posts
- Premix bags (incl. 10%)
- 18 bags
Material cost
- Deck boards
- $812.00
- Fasteners
- $90.00
- Joists and rims
- $512.00
- Posts
- $100.00
- Footing concrete
- $117.00
- Hangers and hardware
- $150.00
- Estimated material cost
- $1,781
Beam, joist and post sizes, ledger attachment, footing depth and railings are set by local code — confirm them with your building department before buying. Railings, stairs, flashing and ledger fasteners are not included. Use the Stair Calculator for steps.
Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.
Before you start
- Check local code first: footing depth, beam and joist sizes, ledger attachment and railing height are all regulated.
- Decide the board direction — this planner runs boards parallel to the house, on joists running out from it.
- Call 811 (or your local utility locator) before digging footings.
Questions about this project
How far apart should deck joists be?
16 in on center is standard for wood and most composite boards laid straight. Diagonal decking and some composites need 12 in — check the board manufacturer.
How many footings does a deck need?
One under each post. Posts are typically 6–8 ft apart along each beam; an attached deck has one beam at the outer edge, a freestanding deck has two.
Calculators used in this project
Need just one number? Each step is also a stand-alone calculator.
- Square Footage CalculatorAdd up shapes in sq ft, sq yd, m² or acres.
- Decking CalculatorDeck boards, joists and screws.
- Concrete Footing CalculatorContinuous footings and pier holes, with rebar.
- Stair CalculatorRisers, treads, run and stringer length.
- Board Foot CalculatorBoard feet and price for a lumber list.