How to measure
- Thickness: for rough hardwood, use the quarter size — 4/4 is 1 in, 5/4 is 1¼ in, 8/4 is 2 in. For dimensional lumber, use the nominal size (2 in for a 2×4).
- Width: measure across the face, or use the nominal width for dimensional lumber.
- Length: the length you'll buy, in feet. Hardwood is often sold random-length — measure each board or use an average.
- Add one line per size, with the number of pieces.
How the board foot calculation works
Board feet (one piece) = thickness (in) × width (in) × length (in) ÷ 144
= thickness (in) × width (in) × length (ft) ÷ 12
Total board feet = Σ board feet × pieces
Cubic feet = board feet ÷ 12
Cost = board feet × price per board footA board foot is a piece 1 in thick, 12 in wide and 12 in long — 144 cubic inches. It measures volume, not length, so a 2 in thick board has twice the board feet of a 1 in board of the same face size.
Hardwood dealers price by the board foot using the rough thickness before planing. Softwood dimensional lumber is named by nominal size: a 2×4 is actually 1½ × 3½ in, but board feet are still calculated on 2 × 4.
Twelve board feet make one cubic foot; one cubic metre is about 424 board feet.
Worked example
Ten 4/4 oak boards, 6 in wide and 8 ft long, at $6 per board foot.
- One board: 1 × 6 × 96 ÷ 144 = 4 board feet
- Ten boards: 4 × 10 = 40 board feet
- Volume: 40 ÷ 12 = 3.33 cu ft
- Cost: 40 × $6 = $240
The list is 40 board feet, about $240 at $6 per board foot.
How much extra to allow
Board feet measure what you buy, not what ends up in the project. Knots, checks at the ends, and planing to thickness all cost volume.
| Situation | Allow |
|---|---|
| Construction lumber | 10% |
| Select hardwood, simple parts | 15–20% |
| Common grade hardwood, figured or matched parts | 30–40% |
Reading your result
The headline is the total board feet for the whole list. Use it to compare dealer quotes or to check an invoice.
The cost uses your price per board foot or per volume. Dimensional softwood at a home center is usually priced per piece — divide that price by the board's board feet to compare.
Assumptions
- Thickness and width are nominal (rough) sizes, as lumber is priced. Planed lumber has less wood than its board-foot figure suggests.
- No waste is added. For furniture, add 20–30% for defects, grain matching and planing; for rough framing, 10%.
- Prices are your own numbers; board-foot prices vary widely by species and grade.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How do you calculate board feet?
Multiply thickness (in) × width (in) × length (in) and divide by 144. With the length in feet, multiply thickness × width × length and divide by 12.
How many board feet is a 2×4×8?
2 × 4 × 8 ÷ 12 = 5.33 board feet, using the nominal 2 × 4 size.
What does 4/4 mean in hardwood?
Quarters of an inch of rough thickness: 4/4 is 1 in, 5/4 is 1¼ in, 6/4 is 1½ in, 8/4 is 2 in. 4/4 usually planes to about ¾ in.
How many board feet are in a cubic meter?
About 424 (423.8). One board foot is 0.00236 m³.