Skip to content
MeasureToBuy

Project planner

Tile a bathroom

From the floor and tub or shower walls to boxes of tile, bags of thinset by trowel notch, grout and the total material cost. Every number matches the stand-alone tile, thinset and grout calculators.

  1. 01 Floor tile
  2. 02 Wall tile
  3. 03 Thinset and grout
  4. 04 Cost
  5. 05 Summary
  1. Step 1: Floor tile

    The floor outside the tub or shower, your tile size and layout.

    The tiled floor outside the tub or shower.

    ⅛ in (3 mm) is common; 1/16 in for rectified tile.

    Floor waste allowance

    Cuts at walls, offcuts and the occasional damaged board. Use more for small or irregular rooms.

    On the box label. Leave as is if buying loose tiles.

    Floor area
    27.5 sq ft
    Tub surround area
    60 sq ft
    Area to tile
    27.5 sq ft
    Tile size
    12 in × 12 in
    Tiles to cover the area0.98 tiles per sq ft with joints
    27 tiles
    Waste allowance
    10%
    Tiles to buy
    30 tiles
    Boxes of 1030 sq ft of tile
    3 boxes
    Grout, approximately1 × 25 lb bag
    1.8 lb
  2. Step 2: Wall tile

    A tub surround or walk-in shower, and the wall tile.

    Wet area walls

    Back wall and two end walls above the tub

    The back wall: a standard tub is 5 ft (1.5 m).

    Each end wall is this wide.

    From the tub rim to the top of the tile.

    1/16 in (1.5 mm) is typical for subway tile.

    Wall waste allowance

    On the box label.

    Area to tile
    60 sq ft
    Tile size
    3 in × 6 in
    Tiles to cover the area7.76 tiles per sq ft with joints
    466 tiles
    Waste allowance
    10%
    Tiles to buy
    512 tiles
    Boxes of 10075 sq ft of tile
    6 boxes
    Grout, approximately1 × 25 lb bag
    5.7 lb
  3. Step 3: Thinset and grout

    Trowel notches set how much mortar you need; tile thickness sets grout depth.

    Used for the grout estimate.

    Larger tiles need larger notches for full contact.

    Thinset, 50 lb bagsfloor ¼ × ⅜ in square, walls ¼ × ¼ in square
    2 bags
    Groutincl. 10% extra
    8.2 lb
    Grout, 25 lb bags
    1 bag
  4. Step 4: Cost

    Your store's prices for tile and setting materials.

    per sq ft
    per sq ft
    per 50 lb bag
    per bag
    Floor tile
    $120.00
    Wall tile
    $225.00
    Thinset
    $50.00
    Grout
    $22.00
    Estimated material cost
    $417.00

MeasureToBuy · project summary

Bathroom tile project

Buy 9 boxes of tile, 2 bags of thinset and 1 of grout.

Measurements

  • Floor length: 5.5 ft
  • Floor width: 5 ft
  • Floor tile width: 12 in
  • Floor tile length: 12 in
  • Floor grout joint: 0.125 in
  • Floor tiles per box: 10
  • Wet area walls: Tub surround
  • Tub length: 5 ft
  • Tub depth: 30 in
  • Tile height above tub: 6 ft
  • Wall tile width: 3 in
  • Wall tile length: 6 in
  • Wall grout joint: 0.063 in
  • Wall tiles per box: 100
  • Tile thickness: 0.375 in
  • Floor trowel notch: ¼ × ⅜ in square
  • Wall trowel notch: ¼ × ¼ in square

Key figures

Floor area
27.5 sq ft
Tub surround area
60 sq ft

Shopping list

Boxes of 1030 sq ft of tile
3 boxes
Boxes of 10075 sq ft of tile
6 boxes
Thinset, 50 lb bagsfloor ¼ × ⅜ in square, walls ¼ × ¼ in square
2 bags
Grout, 25 lb bags
1 bag

Material cost

Floor tile
$120.00
Wall tile
$225.00
Thinset
$50.00
Grout
$22.00
Estimated material cost
$417.00

Walls behind a tub need cement board or a waterproofing membrane, not plain drywall. Joints under ⅛ in take unsanded grout; ⅛ in and wider take sanded grout. Floor and walls may need different bags.

Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.

Before you start

  • Measure the floor outside the tub or shower and the height you'll tile on the walls.
  • Check tile size, tiles per box and thickness on the box label.
  • Wet areas need a waterproof backer or membrane behind the tile — plan it with your tile system.

Questions about this project

What trowel should I use for bathroom tile?

Whatever gives at least 95% mortar contact in wet areas (80% on dry floors). Small wall tile often uses a ¼ × ¼ in notch; larger floor tile a ¼ × ⅜ in or ½ in notch. Lift a tile to check.

Should floor and wall tile use the same grout?

They can, as long as the grout suits both joint widths: non-sanded up to ⅛ in, sanded for wider joints.

Calculators used in this project

Need just one number? Each step is also a stand-alone calculator.