Skip to content
MeasureToBuy

Cubic Yard Calculator

Enter the length, width and depth of the area you're filling and get the volume in cubic yards — the unit bulk soil, gravel, sand and mulch are sold in — plus an approximate weight in tons.

Measurements

Mulch 2–3 in, topsoil 4–6 in, gravel driveway 4–6 in.

Only used to estimate weight.

Advanced optionscoverage, sizes, custom values

Your estimate

You need about 1.85 cubic yards of topsoil.

20 ft × 10 ft × 3 in deep = 50 cu ft.

Cubic yards
1.85 cu yd
Cubic feet
50 cu ft
Cubic meters
1.42 m³
Approximate weightvaries ±20% with moisture
1.9 tons
In pounds / kilograms
3,889 lb
  • A full-size pickup holds about 1–2 cu yd — so plan on one trip. Heavy soil and gravel hit the payload limit before the bed is full.

Next step

Turn it into bags or a bulk order

1.85 cu yd of material. See bags vs bulk for soil, with your own prices.

Estimate soil

Also useful

Ordering gravel?

The gravel calculator works out tons for driveways and paths, with a compaction allowance.

Estimate gravel

How to measure

  1. Measure the length and width of the bed, path or pad in feet.
  2. Decide the depth in inches: 2–3 in of mulch, 4–6 in of topsoil for lawns and beds, 4–6 in of gravel for paths and driveways.
  3. Irregular area? Use the Square Footage Calculator for the area, then multiply by depth — or enter an equivalent rectangle.
  4. Several identical areas, like matching beds? Set 'How many areas this size' under Advanced options.

How the cubic yard calculation works

Cubic feet  = length (ft) × width (ft) × depth (in) ÷ 12
Cubic yards = cubic feet ÷ 27
Weight      = cubic yards × tons per cubic yard

Depth is usually given in inches, so it's converted to feet before multiplying. The calculator converts every unit for you.

A cubic yard is 3 × 3 × 3 ft, so there are 27 cubic feet in one.

Weights use typical bulk densities: topsoil ≈ 1.05 tons per cu yd, sand ≈ 1.35, gravel ≈ 1.4, concrete ≈ 2, mulch 400–800 lb. Wet material can weigh 20% more.

Worked example

A 20 × 10 ft garden bed topped with 3 in of topsoil.

  1. Depth in feet: 3 ÷ 12 = 0.25 ft
  2. Volume: 20 × 10 × 0.25 = 50 cu ft
  3. Cubic yards: 50 ÷ 27 = 1.85 cu yd
  4. Weight: 1.85 × 1.05 = 1.9 tons (about 3,889 lb)

Order about 1.85 cubic yards — most yards sell in half or whole yards, so ask for 2. That's roughly 2 tons: one heavy pickup load or a small delivery.

How much extra to allow

Bulk materials settle or compact once spread. Order a little extra rather than paying a second delivery fee.

SituationAllow
Topsoil, garden soil10–15% (settles)
Mulch10% (settles and breaks down)
Gravel or sand, compacted10–15%

Reading your result

Cubic yards is the order quantity for bulk material. Many suppliers deliver in half-yard steps with a minimum load.

The weight tells you whether your vehicle can haul it. A half-ton pickup's payload runs out at about 1 cu yd of soil or gravel, even though the bed holds more.

Over about 5 cu yd, delivery by dump truck is usually cheaper and quicker than repeated trips.

Assumptions

  • The area has a level base and a uniform depth. Low spots take more material.
  • Densities are typical for loose, moderately moist material. Suppliers who sell by the ton can give you their exact figure.
  • No allowance for settling or compaction is added — see the notes for mulch, gravel and sand.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Retaining walls, driveway bases and fill near foundations need proper compaction and drainage — get local guidance before ordering.

Frequently asked questions

How many cubic feet are in a cubic yard?

27. A cubic yard is 3 ft long, 3 ft wide and 3 ft deep.

How much does a cubic yard of topsoil weigh?

About 1 to 1.1 tons (2,000–2,200 lb) when moderately moist, and more when wet.

How much area does a cubic yard cover?

324 sq ft at 1 in deep, 162 sq ft at 2 in, 108 sq ft at 3 in and 81 sq ft at 4 in.

How many cubic yards fit in a pickup truck?

A full-size bed holds 1–2 cu yd by volume, but heavy material like soil, sand or gravel usually maxes out a half-ton pickup at about 1 cu yd. Mulch is light enough to fill the bed.

How do I convert cubic yards to tons?

Multiply by the material's density in tons per cubic yard: about 1.05 for topsoil, 1.35 for sand, 1.4 for gravel and 2 for concrete.

More area & volume calculators

All area & volume