Skip to content
MeasureToBuy

Flooring Calculator

Enter each room's length and width, choose a waste allowance that matches your layout, and type in the coverage printed on the box. You'll get the floor area and the number of boxes to buy.

Measurements

Waste allowance

Cuts at walls, offcuts and the occasional damaged board. Use more for small or irregular rooms.

Printed on the box label.

Your estimate

You need 11 boxes of flooring.

192 sq ft of floor plus 10% waste = 211 sq ft, in boxes of 20 sq ft.

Floor area
192 sq ft
Waste allowance
10%
Area to cover with waste
211 sq ft
Coverage per box
20 sq ft
Boxes to buy
11 boxes
Area purchased28 sq ft spare after install
220 sq ft
Floor plan
16 ft12 ftLIVING ROOM
Area = length × width for each room, added together. Lines show plank courses; cut pieces at the walls are where waste comes from.

Next step

Estimate the cost

You need 11 boxes. Add your price per square foot or per box, plus underlayment and trim.

Estimate flooring cost

Also useful

Plan the whole install

Step through measurements, waste, boxes and cost, then print a shopping list.

Start the Install Flooring project

How to measure

  1. Measure each room wall to wall at floor level, at the longest and widest points. Round up to the next inch.
  2. Include closets and the floor under appliances that will sit on the new floor (like a freestanding range).
  3. For L-shaped rooms, split them into two rectangles and add each as a separate room.
  4. Read the coverage per box from the product label — it varies from about 15 to 30 sq ft for planks.

How the flooring calculation works

Floor area = Σ (length × width) for each room
With waste = floor area × (1 + waste %)
Boxes      = with waste ÷ coverage per box, rounded up

Each room is a rectangle, so its area is length times width. Rooms are added before rounding so a few square feet left over in one room don't each cost an extra box.

Waste covers the pieces cut off at walls, offcuts too short to reuse, and boards with defects. The right percentage depends on the layout: straight lays waste least, diagonal and herringbone patterns waste more because every edge piece is cut at an angle.

Stores only sell whole boxes, so the final number always rounds up.

Worked example

A 16 × 12 ft living room in laminate, laid straight, with 20 sq ft per box.

  1. Floor area: 16 × 12 = 192 sq ft
  2. With 10% waste: 192 × 1.1 = 211.2 sq ft
  3. Boxes: 211.2 ÷ 20 = 10.56 → 11 boxes

Buy 11 boxes (220 sq ft). You'll have roughly a box worth of offcuts and spares — keep the unopened remainder for repairs.

How much extra to allow

Waste isn't a fudge factor — it's where your cuts come from. Smaller rooms and more corners mean a larger share of each board ends up as an offcut.

SituationAllow
Large, square rooms, straight lay5–7%
Typical rooms, straight lay10%
Diagonal layout or many corners15%
Herringbone or chevron20%+

Reading your result

The highlighted number is boxes to buy. 'Area purchased' is what those boxes cover, so you can compare against the floor area and see your spare.

If your last box is almost fully used, buying one more is cheap insurance against a miscut or a damaged board.

Buy every box from the same production lot so colour and texture match.

Assumptions

  • Rooms are rectangular. For angled walls or bay windows, measure to the furthest point or split the space into rectangles and triangles with the Square Footage Calculator.
  • Coverage per box is the net area the boards cover once installed, as printed on the label.
  • Underlayment rolls butt together without overlap, plus 5% for trimming.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Uneven subfloors, moisture problems or concrete slabs that need levelling should be assessed before buying flooring.
  • Solid hardwood over radiant heat, and glue-down installs, usually need a professional installer and the manufacturer's specification.

Frequently asked questions

How much flooring do I need for a 12 × 12 room?

144 sq ft of floor. With 10% waste that's 158.4 sq ft — 8 boxes at 20 sq ft per box.

Do I include closets?

Yes, if the new floor continues into them. Add each closet as its own room so the total stays accurate.

Why is my waste more than 10%?

Diagonal and herringbone layouts, small rooms like bathrooms and hallways, and long planks in short rooms all produce more offcuts. 15–20% is normal in those cases.

Should I buy extra flooring?

Keep at least one unopened box after the install. Discontinued colours are almost impossible to match if a board is damaged later.

More flooring & tile calculators

All flooring & tile