Material guide
Insulation
Insulation is bought by the bag and judged by R-value. Every bag has a coverage chart — and for blown-in, a minimum depth — that ties the two together.
Calculators
How insulation is sold
- Batt bag
- Pre-cut batts sized for 16 or 24 in framing. A Johns Manville R-13 bag of 15 × 93 in batts covers 106.56 sq ft.
- Roll
- Long batts you cut to length, handy for attics. An Owens Corning R-30, 15 in × 25 ft roll covers 31.25 sq ft.
- Blown-in bag
- Loose fiberglass or cellulose. The chart gives bags per 1,000 sq ft and minimum depth for each R-value — AttiCat needs 25 bags and 17 in for R-49 over 1,000 sq ft.
Terms on the label
- R-value
- Resistance to heat flow. Higher is better. US R-values are in ft²·°F·h/BTU; metric RSI = R × 0.1761.
- Climate zone
- IECC zones 1 (hot) to 8 (sub-arctic). ENERGY STAR's recommended levels depend on your zone.
- Faced batt
- Batt with a kraft paper vapor retarder on one side, installed toward the heated side in most climates.
- Minimum thickness
- The settled depth blown-in insulation must reach, together with the bag count, to deliver its rated R-value.
Buying tips
- Seal air leaks before you insulate — insulation slows heat flow but doesn't stop air.
- Keep insulation clear of recessed lights not rated IC and of flues, as the manufacturer directs.
- Staple depth rulers to attic joists so you can see when blown-in reaches the minimum depth.